So there you have it. If you need a boost for one tap only, then you can still receive this boost without having to place the pump just after the water leaves the hot water tank. Of course, if you dont connect the pump in the way that Stuart Turner advise, you wont have any warranty, so its upto you if you are happy to take this risk. The In Line Micro Pump is made using high quality brass parts in the main body, with highly durable plastic around the motor. This design reduces vibrations and enables the pump to operate very quietly. Measured at 50 Db from 0.1 metres away, the pump makes the same level of noise as light rain. Use with 15mm and 22mm pipes In cases where either the hot or cold water is to be boosted a single pump is needed. A single pump only has one impeller which can be connected to either the hot or cold water supply. What bar rating do I need? Installing the Flowflex Inline Micro Pump is easy business. Any DIY enthusiast can do it themselves, or call on a professional.

This is as good as it gets, and can easily take care of larger showerheads and multiple bathrooms. It’s fit for a big house with a large family, especially if you’ve got those luxury showerheads with massage options as they can really take advantage of excellent water pressure. Does It Have a Twin Impeller? Improve your poor low pressure tap flow or pathetic dribbly shower permanently with a fully automatic ShowerPowerBooster pump. This pump is the size of a golf ball but does the same job as noisy power showers the size of a football and was awarded Best Water Innovation by Imperial College London at the Institute of Physics in London 2012. Over 6,000 satisfied customers now benefit with the SPB and with close to 100% customer satisfaction it is the WRight Choice. Installation is so easy and safe you should not need a plumber or an electrician. If you have a combi boiler in your home your system is mains fed and relies on the local water authorities to provide water to your property boundary. This means that your water pressure and flow may vary at different times of day e.g.. when your neighbours are also using water too, or you may constantly have less water pressure and flow than you would like. Salamander Pumps offer a range of mains booster products including inline pumps and accumulator tanks to improve mains water pressure and flow in domestic and light commercial installations. Look out for the size of the pipe connections on your shower pump. These are usually either 15mm or 22mm. 22mm pipes can transport twice the amount of water, but it’s important that the connections match the rest of your pipework. Shower Pump FAQ What is a shower pump and how does it work?

Each shower pump will have its own flow rate, the amount of water it can pump out at the given pressure in each minute. A 1 bar shower pump is perfect for smaller shower heads, while 1.5 or 2 bar shower heads are best for low pressure showers. 3 bar shower pumps are required for power showers and larger shower heads, delivering a high pressure boost. Size

The CT Range of shower pumps have a regenerative impeller. They are long-lasting, hardworking, compact, and easy to install. Yes. UK Water regulations state that a pump can only be fitted to the mains inlet if it does not exceed 12 L/min. The Flowflex In Line Micro Pump has a maximum flow rate of 9 L/min, making it perfect for use as a whole house solution directly off the mains inlet. Can I use the Flowflex In Line Micro Pump to pump with a Combi Boiler? In some larger homes hot water circulation is usually driven by single impeller pump. It is often difficult to increase the flow rate and pressure as a more powerful pump would just speed up the recirculation. The Flowflex In Line Micro Pump can be fitted in line with the existing recirculation pump to provide a high pressure boost. Ready To Try? UK Water regulations state that a pump can only be fitted to the mains inlet if it does not exceed 12 L/min. The Flowflex In Line Micro Pump has a maximum flow rate of 9 L/min, making it perfect for as a whole house solution directly off the mains inlet. Compatibility with Electric Showers The SPB is future-proofed and can be replaced and repaired by the customer, or upgraded as new models come along, by simply screwing out the old motor or barrel and screwing in a replacement.

If you don't need that much of a boost, you can explore putting just one pump on the hot feed, so a single In Line Micro Pump is the one for you. It depends upon on a number of different factors on how much electricity your shower pump would use. The Flowflex SP2B Inline Shower Pump, for example, uses a lot less energy than other pumps. Most shower pumps use a small amount of electricity for every shower but it adds up over time and with recent news of energy price increases, it can become quite costly. Can a shower pump be too powerful? Ideally, a shower pump will last about eight years before it starts acting up and needs frequent repairs. Without any unusual interruptions and plumbing issues, most shower pumps will perform smoothly for at least six years or so. How far can my shower pump be from the shower tray? If you’ve got more than one small bathroom, this is the way to go. It could also be suitable for a single large bathroom. 3.0 bar These pumps are typically installed in-line with the existing plumbing, either on the hot or cold water supply line, depending on the desired outcome. With their compact and space-saving design, inline shower pumps can be easily fitted into existing pipework, making them a practical choice for both new installations and retrofit projects.

A shower pump is a small device designed to boost your water pressure by increasing the volume of water pumped through your pipes. They are installed in homes where the head pressure alone is not enough to provide a sufficient shower.After fitting the pump: I realised just how noisy it is and once again just how large it is. Even at just 2.3Bar, its pressure is phenomenal. When used with my pull-out spray tap, the pressure is so much that I cant turn the tap to full power, as the spray wets the entire area around the sink. The pressure pushed by this pump is greater than the pressure I get from the mains water supply, which the mixer tap is connected to. CT Force pumps have robust brass ends and brass impellers, and the range includes positive and negative (universal) pumps. Suitable for boosting the shower, bathroom, and whole house. The products in this range include a 5 year warranty and are available in 1.5, 2.0 or 3.0 bar. Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide: Here at PlumbHQ, we don’t want to be your average online plumbing supplies retailer. We have several goals that we always aim to achieve. Not only do we always aim to offer the highest quality products at the lowest prices, but we are also committed to encouraging environmental and social responsibility on behalf of our customers and our manufacturers.

If you’ve ever had the chance to see a shower pump in person, you’d know that they can get pretty bulky. That’s why the size of your new installation is something to keep in mind, especially if you don’t have a ton of spare space to work with inside your home. Regenerative ones are the biggest on average, so you might have to rule those out to make sure it fits comfortably in a cosy space.

What Is The UK’s Best Shower Pump?

You need to work out whether you want to pump to the shower only or additional appliances, for example bath taps, the toilet cistern or washing machine. The CT Xtra twin range will pump the shower only, all other ranges are suitable for multiple household appliances. View our shower pump selector guide below for further information. Do you want to boost hot AND cold water or hot OR cold water? Hot AND cold water